Millermatic 140 115 Volt MIG
  • Millermatic 140 115 Volt MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 140 PRODUCT FEATURES * 115V 20 AMP power input for Light fabrication, Maintenance and repair, Auto Body, farm and home use. * Features Auto-Set. set the wire thickness, dial in the thickness of what you are welding, start welding with perfect parameters. * Infinite Voltage control gives you the flexibility to weld Aluminum, Stainless Steel, Mild Steel. * Smooth-Start patented technology provides a smooth, spatter-free start. No pop gun starts and no spatter to clean up. * Durable cast aluminum drive system incorporates dual-groove quick-change drive roll and spring loaded tension arm with calibrated tension knob. * Thermal overload protection shuts down the unit and activates over temperature light if air flow is blocked or duty cycle is exceeded. * Miller's exclusive "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends tip life and protects internal components. * Self-resetting motor protection circuit eliminates the need to find and replace fuses. OPTIONAL MODELS * Millermatic 211 -- 115V * Millermatic - DVI - 115V * Millermatic Passport Plus - 115V

Read more… close
Millermatic 180 230 Volt MIG
  • Millermatic 180 230 Volt MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 180 PRODUCT FEATURES * The Millermatic 180 Auto-Set has the highest output in it's class. Can weld from 24 ga-5/16 in mild steel in single pass. * 230V, 21.7 AMP power input for Light fabrication, Maintenance and repair, Auto Body, farm and home use. * Features Auto-Set. set the wire thickness, dial in the thickness of what you are welding, start welding with perfect parameters. * Infinite Voltage control gives you the flexibility to weld Aluminum, Stainless Steel, Mild Steel. * Spool gun compatible ! Finally a reliable and economic way to weld aluminum. Utilizing the Spoolmate 100 Series spool gun allows you to weld from 18 ga to 1/4" aluminum. * Smooth-Start patented technology provides a smooth, spatter-free start. No pop gun starts and no spatter to clean up. * Durable cast aluminum drive system incorporates dual-groove quick-change drive roll and spring loaded tension arm with calibrated tension knob. * Miller's exclusive "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends tip life and protects internal components. OPTIONAL MODELS * Millermatic 211 - 230V * Millermatic 212 - 230V * Millermatic 252 - 230V * Millermatic 300 - 230V

Read more… close
Millermatic 211 115V or 230V - MIG
  • Millermatic 211 115V or 230V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 211 PRODUCT FEATURES * Exclusive Multi-voltage plug (MVP) allows you to connect to common 120 or 230V receptacles without tools. * Features Auto-Set. set the wire thickness, dial in the thickness of what you are welding, start welding with perfect parameters. * The Millermatic 211 Auto-Set has the highest output in it's class. Can weld from 24 ga top 3/8 in mild steel in single pass on 230V. * Spool gun ready out of the box ! Utilize the new Spoolmate 100 Series spool gun to weld 18 ga to 3/8 aluminum reliably and economically. * Infinite Voltage control gives you the flexibility to weld Aluminum, Stainless Steel, Mild Steel. * Smooth-Start patented technology provides a smooth, spatter-free start. No pop gun starts and no spatter to clean up. * Miller's exclusive "Tip Saver" short circuit protection shuts down output when tip is shorted to the work. Extends tip life and protects internal components. * Thermal overload protection shuts down the unit and activates over temperature light if air flow is blocked or duty cycle is exceeded. OPTIONAL MODELS * Millermatic 212 - 230V * Millermatic 252 - 230V * Millermatic 300 - 230V

Read more… close
Millermatic 212 208V or 230V - MIG
  • Millermatic 212 208V or 230V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 212 PRODUCT FEATURES * Standard equipped with 'Auto-Set', which automatically sets your welder to the proper parameters insuring maximum performance easily ! * Infinite Voltage control replaces "tap" settings which means that you now can "dial in" precise welding voltage and wirefeed speed when using the Manual Mode. * Compatible with Spoolmatic 15A/30A spool gun. Saves time for the operator by eliminating the need to go back to the machine to change the spool gun wirefeed speed. * New Line Voltage Compensation keeps welding output constant even if power input varies by +/- 10%. * Built-in solid state contactor circuit makes wire electrically "cold" until trigger is pulled. Gives you life-long welding output performance. * Fan-on-demand Cooling System reduces maintenance and operating costs. Only operates when needed reducing power consumption and contaminants drawn into welder. * EZ access consumables compartment with Parameter chart. Convenient flip down compartment provides fast convenient access. OPTIONAL MODELS * Millermatic 180 - 230V * Millermatic 211 - 230V * Millermatic 252 - 208 or 230V * Miller DV12 - 208 or 230V

Read more… close
Millermatic 252 208/230V or 230/460/575V - MIG
  • Millermatic 252 208/230V or 230/460/575V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 252 PRODUCT FEATURES * Large digital front panel with built-in digital timers menu enables operator to preset voltage and wire feed speed. * Auto Gun Detect allows operator to simply pull trigger on MIG gun, spool gun or push/pull gun. Automatically detects and and recalls the voltage, wire feed speed and timer of the active gun. * Push-pull Direct Connect allows you to directly connect your push/pull gun, no extra module required. * Patent-pending EZ Change Low Cylinder Rack allows operators to easily roll cylinders on and off of rack, no lifting required. * Angled, dual-gear driven, cast aluminum drive system features no-tool, quick change, reversible drive rolls and an easy-to-set, scaled tension knob. * EZ access consumables compartment with Parameter chart. Convenient flip down compartment provides fast convenient access. OPTIONAL MODELS * Millermatic 212 - 230V * Miller DV12 - 208 or 230V * Millermatic 350p * Millermatic 350 MpA

Read more… close
Millermatic DV12 208/230V or 230/460/575V - MIG
  • Millermatic DV12 208/230V or 230/460/575V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic DV12 PRODUCT FEATURES * Six taps provide wider welding range of 30-175 amps with superior performance throughout it's range. * Millermatic Dual Voltage Input (DVI) allows you to connect to 115V or 230V power receptacles without any tools. * Angled, dual-gear driven, cast aluminum drive system features no-tool, quick-change reversible drive tolls and easy to set scaled tension knob. * Patent-pending EZ-Change Low Cylinder Rack allows operators to easily roll cylinders on and off rack without lifting. * Add the Spoolmatic 3035 spool gun for aluminum welding with optional Spoolmate Gas Valve Kit. * Thermal overload protection shuts the unit down and sctivates Over Temperature Light if airflow is blocked or duty cycle is exceeded. * Active Arc stabilizer, a patented Miller feature, provides excellent starts that have been proven in head to head competition. OPTIONAL MODELS * Millermatic 211 - 115 or 230V * Millermatic 212 - 208 or 230V * Millermatic 252 - 208 or 230V

Read more… close
Miller Passport Plus 208/230/460/575V - MIG
  • Miller Passport Plus 208/230/460/575V - MIG

Range:

In cart Not available Out of stock
Not available

Miller Passport Plus PRODUCT FEATURES * Portability is number one when you have to go to the job. Passport features all you need to MIG weld in one small light weight package. * Flip of the switch, dual-gas supply selects between the internal CO2 or bulk supply when you're at the shop. * Add the Spoolmate 100 Series spool gun for Aluminum welding. Just plug-in the direct connect spool gun, change to Argon gas and select the aluminum mode on the front of the machine. * Exclusive MVP (Multi-voltage plug) allows you to connect to common 115V or 230V receptacles without tools. * Self contained gas cylinder provides 25 minutes of welding time. * Durable cast aluminum feedhead incorporates dual-groove quick change drive rolls and spring loaded tension arm with calibrated tension knob. OPTIONAL MODELS * Millermatic 211 - 115 or 230V * Millermatic 212 - 208 or 230V * Millermatic 252 - 208 or 230V

Read more… close
  Millermatic 350p 208/230/460/575 V - MIG
  •   Millermatic 350p 208/230/460/575 V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 350p PRODUCT FEATURES * Built-in pulsed MIG programs. All program information is stored for MIG, push-pull and spool guns. * Aluminum Pulse Hot Start automatically provides more arc power to eliminate a "cold start" that is inherent with aluminum starts. * Superior Aluminum Performance with direct connection for optional XR push-pull guns or Spoolmatic spool gun. * Fan-On-Demand cooling only operates when needed, reducing power consumption and reducing contaminants into welder. * Industrial 4-roll wire drive system features two easy-to-set, scaled tension adjustments and quick-change reversible drive rolls for .035 and ,045 wire. * Exclusive Internal Timers for Crater Time Delay and No arc welding output shut-down. OPTIONAL MODELS * Millermatic 252 - 230V * Invision 350MpA * Invision 456MP

Read more… close
Millermatic 350 MpA 208/230/460/575 V - MIG
  • Millermatic 350 MpA 208/230/460/575 V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 350 MpA PRODUCT FEATURES * Dynamic Pulsed MIG features highly engineered pulse programs that default to give a tight productive pulse arc. * Auto-Line Power Management Technology allows for any input voltage hook-up (208 -575V) with no manual linking required. Ideal for dirty ot unreliable input power. * Large dual digital meters are easy to view and presettable to ease setting weld output. * Inverter arc control technology provides greater puddle control for outstanding MIG weld performance. * Line voltage compensation keeps welding output constant even if input power varies by +/- 10%. * SharpArc technology changes welding arc characteristics in Pulsed MIG welding mode. * Light weight aerospace grade aluminum case offers protection and reduced transport weight. OPTIONAL MODELS * Invision 456MP

Read more… close
Millermatic 456MP 208,230,460,575 V - MIG
  • Millermatic 456MP 208,230,460,575 V - MIG

Range:

In cart Not available Out of stock
Not available

Millermatic 456MP PRODUCT FEATURES * Wind Tunnel Technology protects electrical components and PC boards from contamination. * Fan-On-Demand cooling only operates when needed, reducing power consumption and reducing contaminants into welder. * International-style weld disconnets provide high-quality weld cable connections. * Dual digital meters for quick and easy viewing and large setup screen to choose pulse welding mode. * Pulsed spray transfer helps reduce spatter and fume levels. * Light weight aerospace grade aluminum case offers protection and reduced transport weight. OPTIONAL MODELS * Invision 350MpA

Read more… close